Sheeting Tools

                    Bulletin Board      Ship's Store

                      Web Site Navigation

                      Home Boat Builders    Home     Builders Tips

 

WB00858_.GIF (1513 bytes)

Wedge and angle iron yoke.
weage1.jpg (92366 bytes)   The sheet is pulled into place with wedges until the complete sheet fits snugly, then is tack welded in place.
  Yokes can be seen fitted over the stringers in this photo. Sturn-in.jpg (34028 bytes)
Seem.jpg (46829 bytes) Seams alignment using a wedge and 1" angle iron.

Sheeting

  Photos

WB00858_.GIF (1513 bytes)